Table 3. Factory default settings (Continued)
Default SettingFeature
2.4 GHz radio: Enabled with a limit of 50 pps
5 GHz radio: Enabled with a limit of 50 pps
Broadcast and multicast
rate limiting
2.4 GHz radio: Not applicable
5 GHz radio: Disabled
802.11h
DisabledLoad balancing between
radios
DisabledForce sticky clients to
disassociate
DisabledARP proxy
None configuredWireless bridge
General security
DisabledURL filtering
None configuredRADIUS servers
2.4 GHz radio: Disabled
5 GHz radio: Disabled
Neighbor AP detection
Eight default ACLs but none configured with MAC addressesMAC ACLs
DisabledL2 security
Remote management
DisabledSNMP
User Manual253Factory Default Settings and
Technical Specifications
Insight Managed WiFi 6 AX3000 Access Point Model WAX615
To Next Page
Loading...
