Table 1. LED descriptions
DescriptionColorLED Icon
Solid amber initially and then blinking amber slowly: The access
point is starting or in the process of getting an IP address.
Power/Cloud LED
Solid green: The access point started up and functions either as a
standalone access point or as an Insight discovered access point that
is not connected to the Insight cloud-based management platform.
Solid blue: The access point functions in Insight mode and is
connected to the Insight cloud-based management platform.
Blinking amber fast: The access point is updating firmware or is
being reset to factory default settings.
Blinking multicolor: The access point is functioning in extender mode
and the mesh setup is in progress.
Solid amber during operation: The PoE power that the access point
received is not at the 802.3bt (PoE++) level.
Off: No power is supplied to the access point.
Solid green: A 2.5 Gbps Ethernet link is detected on the LAN 1 port.LAN 1 LED
Blinking green: 2.5 Gbps traffic activity is detected on the LAN 1
port.
Solid amber: An Ethernet link at a speed lower than 2.5 Gbps is
detected on the LAN 1 port.
Blinking amber: Traffic activity at a speed lower than 2.5 Gbps is
detected on the LAN 1 port.
Off: Either no Ethernet device is connected to the LAN 1 port or no
Ethernet link is detected.
Solid green: A 1 Gbps Ethernet link is detected on the LAN 2 port.LAN 2 LED
Blinking green: 1 Gbps traffic activity is detected on the LAN 2 port.
Solid amber: An Ethernet link at a speed lower than 1 Gbps is
detected on the LAN 2 port.
Blinking amber: Traffic activity at a speed lower than 1 Gbps is
detected on the LAN 2 port.
Off: Either no Ethernet device is connected to the LAN 1 port or no
Ethernet link is detected.
User Manual14Hardware Overview
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
To Next Page
Loading...
