NETGEAR WAX630E - Page 185

•
Mode
•
Channel
•
Channel width
•
Number of connected clients and maximum number of supported clients
•
WiFi traffic volume
•
Channel utilization
5.
To view information about another radio, click the 2.4 GHz, 5 GHz, or 6 GHz tab.
The pane adjusts.
6.
To view more detailed information, select Management > Monitoring > System.
The page shows four sections:
•
System Information section: The following settings are displayed:
- System Name: The access point NetBIOS name.
- System Mode: The access point system mode (AP).
-
LAN1 MAC Address: The MAC address of the LAN 1 Ethernet port of the
access point.
-
LAN2 MAC Address: The MAC address of the LAN 2 Ethernet port of the
access point.
-
Wireless MAC Address for 2.4 GHz: The MAC address of 2.4 GHz WiFi
interface (radio) of the access point.
User Manual185Monitor the Access Point and the
Network
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E