4. Use the lock screw to lock the metal bracket into place.
5.
Use the four short screws to attach the mounting plate to the T-bar.
6.
Connect an Ethernet cable (if you use a PoE++ switch) or both a power adapter and
an Ethernet cable to the access point before you attach the access point to the
mounting plate.
The access point sits flat on the ceiling surface when it is mounted.
User Manual265Mount the Access Point to a Wall
or Ceiling
Insight Managed WiFi 6E AXE7800 Tri-band Multi-Gig Access Point Model WAX630E
To Next Page
Loading...
