User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111
3-12 Basic Setup
202-10026-01
Verify wireless connectivity to your network.
a. Verify that the status monitor information at the bottom of the utility matches your
wireless network.
b. Check the color of the WG111 icon in the Windows system tray: green or yellow
indicates a working connection; red indicates no connection.
c. Check the WG111 LED: blinking means attempting to connect; solid indicates a good
connection; off means the WG111 is not plugged in.
d. Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see “Troubleshooting” on page 3-14.
To Next Page
Loading...
Need help?
General