Installation Guide for the NETGEAR 108 Mbps Wireless PCI Adapter WG311T
Configuration 3-13
Advanced Settings Page
Generally, the Advanced settings should not require adjustment. Except for the power saving
setting, changing any of the settings incorrectly on this page could cause your wireless connection
to fail.To display the Advanced Settings Page, click the Advanced Settings button on the Settings
Page.
Figure 3-8: Advanced Settings page
• Power Saving: Select On if you are using a notebook computer running on battery power.
• Preamble: A long transmit preamble may provide a more reliable connection or slightly
longer range. A short transmit preamble might give slightly better performance.
• Transmit Power: Lowering the output power level lets you reduce the chance of interference
with other nearby access points but reduces the range of your adapter.
• Wireless Mode: Select the wireless protocols you will use. Depending on your wireless
adapter, you can choose some or all of the available 802.11 wireless protocols. Note that, if the
wireless network you are communicating with uses the 802.11a Turbo mode, you must include
that in your selection.
• Fragmentation Threshold: This is the maximum packet size used for fragmentation. Packets
larger than the size programmed in this field will be fragmented. The Fragment Threshold
value must be larger than the RTS Threshold value.
To Next Page
Loading...
