Reference Manual for the 54 Mbps Wireless Router WGR614 v5
4-10 Wireless Configuration
June 2004 202-10036-01
4.
Select the Authentication Type and Encryptions strength from the drop-down lists.
Figure 4-5. Wireless Settings encryption menu
5.
You can manually or automatically program the four data encryption keys. These values must
be identical on all computers and Access Points in your network.
• Automatic - Enter a word or group of printable characters in the Passphrase box and click
the Generate button. The passphrase is case sensitive; NETGEAR is not the same as
nETgear. The four key boxes will be automatically populated with key values.
• Manual - Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These entries
are not case sensitive; AA is the same as aa.
Select which of the four keys will be active.
Please refer to “WEP Wireless Security” on page D-4 for a full explanation of each of these
options, as defined by the IEEE 802.11 wireless communication standard.
6. Click Apply to save your settings.
To Next Page
Loading...
Need help?
General
