Reference Manual for the 54 Mbps Wireless Router WGR614 v5
4-12 Wireless Configuration
June 2004 202-10036-01
1.
Log in to the WGR614 v5 firewall at its default LAN address of http://www.routerlogin.net
with its default user name of admin and default password of password, or using whatever
LAN address and password you have set up.
2. Click Advanced Wireless Setup in the main menu of the WGR614 v5 firewall.
3. From the Wireless Settings menu, click Setup Access List to display the Wireless Access
menu shown below.
Figure 4-7: Wireless Card Access List Setup
4.
Click Add to add a wireless device to the wireless access control list. The Available Wireless
Cards list displays.
Note: When configuring the firewall from a wireless computer whose MAC address is
not in the Trusted PC list, if you select Turn Access Control On, you will lose your
wireless connection when you click on Apply. You must then access the wireless router
from a wired computer or from a wireless computer which is on the access control list to
make any further changes.
To Next Page
Loading...
Need help?
General
