NETGEAR WN3000RP Installation Guide

11
7. Use a WiFi network manager on the computer or mobile device to
connect to the extender’s newly created WiFi network.
Repeat this step for all of your computers and mobile devices.
8. If the screen is still displayed on your computer or device, select the
following check box and click the Continue button.
9. Unplug the extender and move it to a new location closer to the
area with a poor WiFi signal.
The location that you choose must be within the range of your
existing WiFi router network.
10. Plug the extender into an electrical outlet.
The Power LED lights green. If the Power LED does not
light, press the Power button.
Use the Router Link LED to help you choose a spot where
the extender-to-router connection is optimal.

NETGEAR WN3000RP Specifications

General

Interface	Ethernet
Connectivity technology	Wireless
Wi-Fi band	Single-band (2.4 GHz)
Ethernet LAN	Yes
Security algorithms	WEP, WPA, WPA2-PSK
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Chipset	-
Internal	No
Certification	RoHS, WEEE, CEC
Component for	PC/Laptop
Product color	White
Dimensions (WxDxH)	112 x 74 x 45 mm
Minimum system requirements	802.11 b/g/n 2.4 GHz wireless router or gateway 802.11 b/g/n 2.4 GHz wireless adapter or Ethernet adapter and cable for each computer
Compliance industry standards	IEEE 802.11 b/g/n
Compatible operating systems	Windows 7, Vista, XP, 2000 Mac OS UNIX Linux

Weight and Dimensions

Weight	245 g