NETGEAR WN311B-100NAS

NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
Basic Setup 1-5
v1.0, October 2008
If you right-click in the system tray icon, you can disable the Internet notification feature by
clearing check mark on this line. If you do so, then only the IP address is shown.
Removing the WN311B Software
You can remove the wireless adapter software in these two ways:
• Navigate the Windows Start menu to the WN311B Wireless PCI Adapter program group,
select the uninstall option, and follow the screen prompts.
• Navigate the Windows Start menu to the Control Panel Add or Remove Program item, select
the WN311B Wireless PCI Adapter option, and follow the screen prompts.
Upgrading the WN311B Software
Upgrades may be available at the NETGEAR website. To install an upgrade, follow these steps.
1. Write down the settings for any profiles that you want to save. They will not be retained.
2. Download the upgrade from the NETGEAR website Support page.
3. Remove the WN311B software from your computer.
4. Remove the WN311B Wireless PCI Adapter adapter from your computer, and restart your
computer.
5. Run the installer that you downloaded (the file ends in .exe).
6. Follow the installer instructions, and then restart your computer.
Figure 1-2