NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
2-16 Network Connections and Wireless Security
v1.0, October 2008
Setting up WEP Encryption Security
To set up WEP Encryption Security:
1. Run the WN311B Smart Wizard.
a. Make sure that the WN311B software is installed and the WN311B Wireless PCI Adapter
is installed in a PCI slot in your computer.
b. Use the icon to open the Smart Wizard. The Settings tab page opens:
2. Configure the Security settings.
a. In the Profiles box, select the profile or type in a profile name.
b. In the Network Name (SSID) field select the network, or enter the SSID.
c. In the Security section, select WEP.
3. Select the WEP encryption strength you will use.
Figure 2-13
Note: You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.
To Next Page
Loading...
