NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
2-10 Network Connections and Wireless Security
v1.0, October 2008
Creating an Infrastructure (Access Point) Profile
To create a profile:
1. Use the icon to open the Smart Wizard. The Settings page opens.
2. Enter the network settings.
a. In the Network Type section, be sure that Access Point (Infrastructure) is selected.
b. In the Profiles box, type the name of the profile.
c. In the Network Name (SSID) field select a network or enter the SSID.
3. Save your settings in a Profile.
a. Click the Save Profile button.
All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the wizard, or Cancel to return to the previous settings.
4. Verify wireless connectivity to your network.
Figure 2-8
Note: You will not get a wireless network connection unless the network SSID
matches exactly the SSID used by the access point.
To Next Page
Loading...
