Set up Your Wireless Adapter
9
N900 Wireless Dual Band USB Adapter (WNDA4100)
To select and join a wireless network:
1. From NETGEAR Genie, click Join a Network.
2. Look for your network in the list on this screen. If you do not see your network, you might
need to scroll down to view more networks.
If the network name is not displayed, that indicates a hidden network that does not
broadcast its SSID. Use the manual method to connect to a hidden network. See Join a
Hidden Network on page 10.
3. Click the network that you want to join.
4. Click the Connect button.
5. If the wireless network is secure, enter the network password.
The adapter joins the wireless network. This could take a few minutes.
To Next Page
Loading...
Need help?
General