NETGEAR WNDR3300 - User Manual

Contents
1 Hardware Specifications•
2 OEM MTD Partitions•
3 Links•
4 Common questions•
5 Flash Preparation
5.1 Initial flash from
Netgear firmware
♦
5.2 Upgrading with
DD-WRT
♦
•
6 Troubleshooting•
7 Revert to Netgear firmware•
8 Netgear Firmware Recovery
Utility
•
9 JTAG / Serial information•
10 Configuration suggestions•
11 Pin Short Recovery•
12 Model and Revision
Differences
•
13 Power supply information•
14 Internal antennas•
15 External antennas•
16 Front LED Information•
17 Dome LED Information•
18 GPIO information•
Hardware Specifications
FCC ID: PY308100078, PY307300072•
Industry Canada ID: 4054A-07300072•
CPU1: Broadcom BCM4704 (264 MHz)•
Flash ROM / RAM Memory: 4 MiB / 16 MiB•
WI1 chip1: Broadcom BCM4321•
WI1 chip2: Broadcom BCM2055•
WI1 protocols / MIMO config: abgn / 2x2:2•
WI2 chip1: Broadcom BCM4318•
WI2 protocols: bg•
Wireless antenna connectors: none•
Ethernet: Broadcom BCM4704•
Switch: Broadcom BCM5325F•
LAN / WAN ports: 4 / 1 up to 100 Mb/s•
Serial / JTAG: yes / no•
Netgear_WNDR3300
Contents 1

NETGEAR WNDR3300 Specifications