What to do if the Internet light stays amber on my NETGEAR Network Router?
If the Internet light on your NETGEAR Network Router stays amber, it means the Internet is not accessible. To resolve this, confirm that you have the correct internet settings. Alternatively, you can try turning the power off and back on to see if the router recovers, or clear the router’s configuration to factory defaults.
How to fix a NETGEAR WNR2000v2 when the power light is not on?
If the power light is not on, ensure that the power cord is properly connected to your NETGEAR Network Router and that the power adapter is properly connected to a functioning power outlet. Also, check that you are using the power adapter supplied by NETGEAR for this product.
What to do if the Internet or LAN port lights are not on on NETGEAR WNR2000v2?
If the Internet or LAN port lights are not on, make sure that the Ethernet cable connections are secure at the router and at the computer. Also, make sure that power is turned on to the connected computer and be sure you are using Ethernet cables like the cable that was supplied with the wireless router.
Why is my NETGEAR Network Router not saving changes in the browser interface?
If the wireless router does not save changes you have made in the browser interface, be sure to click Apply before moving to another screen or tab, or your changes could be lost. Also, click Refresh or Reload in the Web browser, because the changes might have occurred, but the Web browser might be caching the old configuration.
How to fix NETGEAR Network Router when the power light blinks green?
If the Power light blinks green slowly and continuously on your NETGEAR Network Router, it means the router firmware is corrupted. To fix this, ensure your PC is connected to your router and the router is powered on. Insert the Resource CD that came with your router into your PC, click Supporting Software, then Netgear Firmware Recovery Utility, and follow the prompts for the recovery process.
What to do if my computer might not recognize any DNS server addresses for my NETGEAR Network Router?
If your computer might not recognize any DNS server addresses, restart your computer.
Why does my NETGEAR WNR2000v2 Network Router show the date as January 1, 2000?
If the date shown on your NETGEAR Network Router is January 1, 2000, it means the router has not yet successfully reached a network time server. Check that your Internet access settings are correct. If you have just completed configuring the router, wait at least 5 minutes, and check the date and time again.
Why is the time off by one hour on my NETGEAR WNR2000v2?
If the time is off by one hour on your NETGEAR Network Router, it means the router does not adjust for daylight savings time. In the E-mail screen, select the Automatically Adjust for Daylight Savings Time check box.
General| Brand | NETGEAR |
|---|---|
| Model | WNR2000v2 |
| Category | Network Router |
| Language | English |
Explains typographical conventions and formats used in the manual.
Lists changes and updates made to the manual since the router's introduction.
Guide on using the Setup Manual for initial router configuration and setup.
Instructions on how to access and log in to the wireless router's interface.
Steps to change the language displayed in the router manager screens.
How to use the Smart Setup Wizard to configure your internet connection.
Details on viewing and configuring essential Internet Service Provider settings.
Guide on setting up and testing the initial wireless network connection.
Explains wireless security options and considerations for network protection.
How to document essential wireless network settings for future reference.
Steps to modify the wireless network's security configuration.
Detailed guide on setting up WEP encryption for wireless security.
How to configure WPA-PSK and WPA2-PSK encryption for strong wireless security.
Access and configure advanced wireless network parameters.
Guide to using WPS for easy and secure wireless device connection.
How to control network access by filtering MAC addresses.
Instructions for changing the router's administrator login password.
How to save and restore the router's configuration settings.
Explanation of the router's firewall features and protection capabilities.
Steps to set up a separate network for guest access.
Introduction to web content filtering and browser activity monitoring features.
How to restrict access to specific websites or domains.
Guide on blocking specific internet services or ports.
How to set schedules for blocking specific content or services.
How to view logs of websites accessed or attempted.
Setting up email notifications for log events and alerts.
How to configure the router's time zone for accurate logging and scheduling.
Configure LAN IP settings, including DHCP and static IP options.
How to set a user-friendly name for the router.
Advanced settings for LAN IP configuration and routing protocols.
How to enable the router to automatically assign IP addresses to network devices.
Assigning static IP addresses to specific devices via MAC address.
Guide to setting up a dynamic DNS service for remote access.
Settings for WAN port, including firewall and DMZ configuration.
How to configure a DMZ server for specific applications.
Adjusting Network Address Translation settings for security and application compatibility.
Manually adding static routes for advanced network configurations.
How to configure the router to extend wireless network coverage.
Steps to configure the router as a wireless base station for repeating.
Instructions for setting up another router as a wireless repeater unit.
How to allow specific inbound traffic to access local network resources.
Forwarding specific incoming protocols to local servers on the network.
Defining and adding custom services for port forwarding or triggering.
Dynamically opening ports based on outbound traffic to allow specific applications.
Enabling UPnP for automatic device discovery and configuration.
Tips for improving wireless network speed and range through placement and settings.
Adjusting the Maximum Transmission Unit size for network performance.
Prioritizing network traffic for voice, video, and other applications.
Configuring Wi-Fi Multimedia QoS for prioritizing voice and video traffic.
Creating QoS policies to prioritize specific types of internet traffic.
Applying QoS policies to specific devices connected to the router's LAN ports.
Applying QoS policies based on the MAC address of network devices.
Explains common home and small office networking technologies and considerations.
Guide to determining network speed needs for various applications.
How to view current status information for the wireless router.
Displaying a table of all devices connected to the router.
Options for backing up, restoring, or resetting router configuration.
Detailed steps for saving and retrieving router configuration settings.
How to reset the router to its factory default configuration settings.
Instructions for updating the router's firmware to the latest version.
How to check for and install new firmware versions via the router interface.
Steps for manually downloading and installing new router firmware.
How to allow remote access for configuring and managing the router.
Monitoring internet traffic volume, setting limits, and viewing usage updates.
Basic troubleshooting steps and advice for common network issues.
How to diagnose and resolve issues with the router's basic functions and lights.
Steps to fix issues preventing login to the wireless router.
Diagnosing problems with the router's connection to the internet.
Steps to check if the router is receiving an IP address from the service provider.
Specific steps for troubleshooting PPPoE internet connection issues.
How to fix problems with loading web pages after obtaining an IP address.
Using the ping utility to diagnose network path issues.
Verifying the network path from your computer to the router.
Testing the network path from your computer to a remote device.
Diagnosing and fixing problems with the router's date and time settings.
Steps to resolve issues with wireless adapter connectivity.
How to reset the router to its factory default settings and password.
Lists the factory default settings for the router's various features.
Provides overall specifications including physical, environmental, and interface details.
Links to external documents for further understanding of networking technologies.
To Next Page