NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Configuring Basic Connectivity 1-2
v1.0, January 2010
Logging In To Your Wireless Router
When the wireless router is connected to your network, you can access and configure the router
using your browser.
To access the router:
1. Connect to the wireless router by typing http://www.routerlogin.net in the address field of
your browser, and then press Enter. A login window displays.
2. Enter admin for the router user name and your password (or the default, password). For
information about how to change the password, see “Changing the Administrator Password”
on page 2-21.
Figure 1-1
Tip: You can connect to the wireless router by typing either of these URLs in the
address field of your browser, and then pressing Enter:
• http://www.routerlogin.net
• http://www.routerlogin.com
If these URLs do not work, you must type the IP address of the router, for
example, http://www.192.168.1.1.
Note: The router user name and password are not the same as any other user name or
password you might use to log in to your Internet connection.
To Next Page
Loading...
Need help?
General
