NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Configuring Basic Connectivity 1-3
v1.0, January 2010
The Checking for Firmware Updates screen appears unless you previously cleared the Check
for Updated Firmware Upon Log-in check box.
If the router discovers a newer version of firmware, the message on the left displays when you
log in. If no new firmware is available, the message on the right displays.
To automatically update to the new firmware, click Yes to allow the router to download and
install the new firmware file from NETGEAR.
When the upload is complete, your router automatically restarts. The update process typically
takes about 1 minute.
Figure 1-2
Figure 1-3
Warning: When uploading firmware to the WNR2000v2 router, do not interrupt
the Web browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.
To Next Page
Loading...
Need help?
General
