NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Using Network Monitoring Tools 6-11
v1.0, January 2010
• If no new firmware version is available, a message displays and the router returns to the
Firmware Update screen.
3. To update your firmware, click Yes and follow the prompts.
When the upload is complete, your router automatically restarts. The update process typically
takes about 1 minute.
Updating Manually to New Router Firmware
To manually select, download, and install new software to your router:
1. Log in to your router, select Router Status under Maintenance on the main menu, and make
note of the firmware version of your router.
2. Go to the WNR2000v2 support page on the NETGEAR website at
http://www.netgear.com/support.
Figure 6-8
Warning: When updating firmware to the WNR2000v2 router, do not
interrupt the Web browser by closing the window, clicking a link,
or loading a new page. If the browser is interrupted, it could corrupt
the firmware.
Figure 6-9
To Next Page
Loading...
