EasyManua.ls Logo

NETGEAR Wireless-N 150 - User Manual

NETGEAR Wireless-N 150
104 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
202-10523-01
January 2010
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134
Wireless-N 150 ADSL2+
Modem Router DGN1000
User Manual

Table of Contents

Questions and Answers

  • B
    Beverly RoblesJul 26, 2025
    What to do if I cannot log in to my NETGEAR Network Router?
    • B
      Brett KentJul 26, 2025
      If you're having trouble logging into your NETGEAR Network Router, here are a few things to check: * If using Ethernet, verify the connection between your computer and the router. * Ensure your computer's IP address is on the same subnet as the router. If it shows as 169.254.x.x, check the router connection and reboot your computer. * If you changed the router's IP and forgot it, reset the router to factory defaults. * Confirm that Java, JavaScript, or ActiveX is enabled in your browser. * Try restarting your browser. * Double-check your login information. * When configuring settings, click 'Apply' before navigating away. * Refresh or reload the web browser page.
  • M
    marylopezJul 30, 2025
    Why is the Internet LED red on my NETGEAR Wireless-N 150 Network Router?
    • C
      Christine OrtegaJul 30, 2025
      If the Internet LED on your NETGEAR Network Router is red, verify that your login credentials are correct. Also, check with your ISP to ensure the Multiplexing method, VPI, and VCI settings on the ADSL settings screen are accurate. Finally, check if your ISP is experiencing any issues.
  • D
    Debbie AyalaAug 4, 2025
    Why is my NETGEAR Wireless-N 150 not obtaining an Internet IP address?
    • M
      mdeanAug 4, 2025
      If your NETGEAR Network Router is not obtaining an Internet IP address, it might be due to an incorrectly set login program, service name, username, or password. Your ISP might be checking for your computer’s host name or might only allow one Ethernet MAC address to connect to the Internet.
  • S
    Sharon Clarke MDAug 8, 2025
    What to do if a window appears asking me to reload firmware on my NETGEAR Wireless-N 150?
    • A
      Albert FrenchAug 8, 2025
      If a window appears asking you to reload firmware on your NETGEAR Network Router, please follow the on-screen instructions to access new firmware and reload it into your router.
  • J
    John ClarkeAug 12, 2025
    What to do if the LAN or ADSL Port LED is off on my NETGEAR Wireless-N 150 Network Router?
    • J
      Javier HancockAug 12, 2025
      If the LAN or ADSL Port LED on your NETGEAR Network Router is off, ensure the Ethernet cable connections are secure at both the router and the connected device. Verify that power is on for the connected device. Use the cable supplied with the router for the ADSL port. If the ADSL link LED remains off, there might be no ADSL service or a faulty cable connected to the ADSL port.
  • L
    Lisa JohnsonAug 16, 2025
    What to do if the ADSL Link LED is off on my NETGEAR Wireless-N 150?
    • R
      Ryan MooreAug 16, 2025
      If the ADSL Link LED is off on your NETGEAR Network Router, disconnect all telephones on the line. Check that the telephone company has established and tested the connection to your line. Verify that you are connected to the correct telephone line.
  • J
    Jordan MaciasAug 21, 2025
    What to do if the Welcome Page displays instead of the Router Main Menu on my NETGEAR Wireless-N 150?
    • A
      Adriana MartinAug 21, 2025
      If the Welcome Page displays instead of the main menu for your NETGEAR Network Router, try logging into the router at http://routerlogin.com/basicsetting.htm. Alternatively, perform a factory reset to take the router out of “Wizard Mode”.

Summary

Regulatory Compliance Information

FCC Requirements for Operation in the United States

Connecting Your Wireless Modem Router to the Internet

Using the Setup Manual

What You Need before You Begin

Logging In to the Wireless Modem Router

Using the Setup Wizard

Auto-Detecting Your Internet Connection

Viewing or Manually Configuring Your ISP Settings

Configuring ADSL Settings

Configuring Your Wireless Network and Security Settings

Wireless Security Options

Overview of available wireless security methods like WEP, WPA-PSK, and WPA2-PSK.

Manually Configuring Your Wireless Network

Steps to manually set up the wireless network name (SSID) and other parameters.

Restricting Wireless Access to Your Network

Methods to control which devices can connect to the wireless network.

Restricting access by MAC address

How to filter network access based on the MAC addresses of wireless devices.

Configuring Mixed WPA-PSK+WPA2-PSK Security

Steps to configure a combined WPA-PSK and WPA2-PSK security mode for enhanced compatibility.

Using Push N Connect (WPS) to Configure Your Wireless Network and Security

Method for easily setting up wireless security using Wi-Fi Protected Setup (WPS).

Connecting Additional Wireless Client Devices After WPS Setup

Protecting Your Network

Changing the Built-In Password

Instructions for changing the router's administrator password for enhanced security.

Blocking Keywords, Sites, and Services

Setting up content filtering to block specific websites, keywords, or services.

Firewall Rules

Explanation of how firewall rules manage network traffic and protect against unauthorized access.

Configuring Firewall Rules

Steps to add, edit, delete, or move firewall rules for inbound and outbound traffic.

Inbound Rules (Port Forwarding)

How to allow specific inbound traffic from the Internet to local servers.

Outbound Rules (Service Blocking)

How to block specific Internet services or ports for computers on the local network.

Scheduling Firewall Services

Setting up schedules for when firewall rules are active or inactive.

Managing Your Network

Updating the Firmware

Procedure for checking and installing new firmware versions to keep the router updated.

Backing Up, Restoring, and Erasing Your Settings

How to save, restore, or reset the router's configuration settings.

Running Diagnostic Utilities and Rebooting the Wireless Modem Router

Using built-in tools to test network connectivity and rebooting the device.

Configuring Remote Management

Advanced Configuration

Configuring WAN Settings

Configuring Dynamic DNS

Configuring LAN Setup

Configuring DHCP

Configuring Reserved IP Addresses

Configuring Advanced Wireless Settings

Adjusting advanced wireless parameters beyond basic setup.

Troubleshooting

Basic Functioning

Verifying the router's power and basic LED status indicators after startup.

Power LED Is Off

Steps to diagnose and resolve issues when the router's power LED is not illuminated.

Power LED Is Red

Troubleshooting the router when the Power LED indicates a fault condition.

LAN or ADSL Port LED Is Off

Window Appears Asking You to Reload Firmware

Cannot Log in to the Wireless Modem Router

Steps to resolve issues preventing access to the router's web interface.

Troubleshooting the ISP Connection

Steps to diagnose and fix problems related to the Internet Service Provider connection.

ADSL Link

Internet LED is Red

Obtaining an Internet IP Address

Troubleshooting PPPoE or PPPoA

Debugging and resolving connection issues with PPPoE or PPPoA protocols.

Troubleshooting Internet Browsing

Steps to resolve problems with loading web pages after obtaining an IP address.

Resolving a ‘Reload Firmware’ Message

Automatic Firmware Recovery

NETGEAR Wireless-N 150 Specifications

General IconGeneral
BrandNETGEAR
ModelWireless-N 150
CategoryNetwork Router
LanguageEnglish

Related product manuals