Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
Protecting Your Network 3-12
v1.1, January 2010
• Start Port and End Port. If a port range is required, enter the range here. If a single port is
required, enter the same value in both fields.
4. Click Apply to save your changes.
Setting Times and Scheduling Firewall Services
The wireless modem router uses the Network Time Protocol (NTP) to obtain the current time and
date from one of several network time servers on the Internet.
Setting Your Time Zone
To localize the time for your log entries, you must specify your time zone:
1. Log in to the wireless modem router at its default LAN address of http://192.168.0.1 with its
default user name of admin and default password of password, or using whatever password
and LAN address you have chosen for the wireless modem router.
2. Select Schedule below the Security heading to display the following screen:
Figure 3-10
To Next Page
Loading...
Need help?
General
