1-1
v1.1, January 2010
Chapter 1
Connecting Your Wireless Modem Router to the
Internet
This chapter describes how to configure your Wireless-N 150 ADSL2+ Modem Router Internet
connection. When you perform the initial configuration of your wireless modem router using the
Resource CD as described in the Wireless Modem Router DGN1000 Setup Manual, these settings
are configured automatically for you. This chapter provides further details about these settings, as
well as instructions on how to log in to the wireless modem router for further configuration.
Note: NETGEAR recommends using the Smart Wizard on the Resource CD for initial
configuration, as described in the
Wireless Modem Router DGN1000 Setup Manual.
This chapter includes:
• “Using the Setup Manual”
• “What You Need before You Begin” on page 1-2”
• “Logging In to the Wireless Modem Router” on page 1-2”
• “Auto-Detecting Your Internet Connection” on page 1-5”
• “Viewing or Manually Configuring Your ISP Settings” on page 1-6”
• “Configuring ADSL Settings” on page 1-10”
• “How the Internet Connection Works” on page 1-11”
Using the Setup Manual
For first-time installation of your modem router, refer to the Wireless Modem Router DGN1000
Setup Manual. The Setup Manual explains how to launch the NETGEAR Smart Wizard on the
Resource CD to step you through the procedure to connect your router, modem, and computers.
The Smart Wizard will assist you in configuring your wireless settings and enabling wireless
security for your network. After initial configuration using the Setup Manual, you can use the
information in this Reference Manual to configure additional features of your wireless router.
To Next Page
Loading...
Need help?
General
