NETGEAR Wireless-N 150 User Manual

Figure 1-3
Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
1-4 Connecting Your Wireless Modem Router to the Internet
v1.1, January 2010
• Router Status screen. The Router Status screen displays if the wireless modem router has not
been configured yet or has been reset to its factory default settings. See “Viewing the Wireless
Modem Router Status” on page 4-5.
You can use the Setup Wizard to automatically detect your Internet connection as described in
“Using the Setup Wizard, or you can bypass the Setup Wizard and manually configure your
Internet connection as described in “Viewing or Manually Configuring Your ISP Settings” on
page 1-6.
Using the Setup Wizard
You can manually configure your Internet connection using the Basic Settings screen, or you can
allow the Setup Wizard to detect your Internet connection. The Setup Wizard searches your
Internet connection for servers and protocols to determine your ISP configuration. This feature is
not the same as the Smart Wizard on the Resource CD that is used for installation.
To use the Setup Wizard:
1. To go to the Setup Wizard screen, from the top of the main menu, select Setup Wizard:
Figure 1-4

NETGEAR Wireless-N 150 Specifications

General

Brand	NETGEAR
Model	Wireless-N 150
Category	Network Router
Language	English