NETGEAR Wireless-N 150 User Manual

Factory Settings, Technical Specifications, and Wall Mounting A-1
v1.1, January 2010
Appendix A
Factory Settings, Technical Specifications, and
Wall Mounting
This appendix includes the factory settings and technical specifications for the Wireless-N 150
ADSL2+ Modem Router, and instructions for wall-mounting the unit.
Factory Settings
You can return the wireless modem router to its factory settings. On the bottom of the wireless
modem router, press and hold the Restore Factory Settings button
for over 7 seconds. The
wireless modem router resets, and returns to its factory settings.
Your device will return to the
factory configuration settings shown in the following table.
Feature Default Behavior
Router
login
User login URL http://www.routerlogin.com
User name (case-sensitive) admin
Login password (case-sensitive) password
Internet
connection
WAN MAC address Use default address
WAN MTU size 1492
Port speed Autosensing
Local
network
(LAN)
LAN IP 192.168.0.1
Subnet mask 255.255.255.0
RIP direction None
RIP version Disabled
RIP authentication None
DHCP server Enabled
DHCP starting IP address 192.168.0.2
DHCP ending IP address 192.168.0.254
DMZ Disabled

NETGEAR Wireless-N 150 Specifications

General

Brand	NETGEAR
Model	Wireless-N 150
Category	Network Router
Language	English