Note: You must use the Setup Wizard to select the correct country for the default ADSL
settings to work.
Wireless-N 150 ADSL2+ Modem Router DGN1000 User Manual
Connecting Your Wireless Modem Router to the Internet 1-11
v1.1, January 2010
If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:
1. From the main menu, select ADSL Settings.The ADSL Settings screen displays.
Figure 1-6
2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
3. For the VPI, type a number between 0 and 255. The default is is 8 for the US version, 0 for
world wide version, and 1 for German version.
4. For the VCI, type a number between 32 and 65535. The default is 35 for the US version, 38 for
World Wide version, and 32 for German version.
5. Click Apply.
How the Internet Connection Works
Your wireless modem router is now configured to provide Internet access for your network. Your
wireless modem router automatically connects to the Internet when one of your computers requires
access. It is not necessary to run a dialer or login application such as dial-up networking or
Enternet to connect, log in, or disconnect. The wireless modem router performs these functions
automatically as needed.
To Next Page
Loading...
