NETGEAR WNR2000v2

NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Index-4
v1.0, January 2010
path, testing 7-10
Performance mode 2-8
performance, optimizing 5-15
physical push button (WPS) 2-14
physical specifications A-3
PIN 2-15, 2-17
ping 4-9, 7-8
placement, router 5-16
poll interval 6-6
port filtering 3-3
port forwarding
configuring 5-6
example 5-5
port numbers 3-3
port status 6-6
port triggering
configuring 5-10
example 5-3
portmap table 5-15
power adapter specifications A-3
Power light, troubleshooting and 7-2
Powerline HD products 5-25
PPPoE (PPP over Ethernet) 1-10
PPTP (Point to Point Tunneling Protocol) 1-9
Preamble mode 2-13
primary DNS server 1-8, 1-11
prioritizing traffic 5-18
protocols, compatibility A-3
Push ’N’ Connect 2-13, 6-4, 7-4
push button configuration (WPS) 2-14
Q
QoS (Quality of Service) 5-18
R
radio, wireless 1-13, 2-12, 6-4
range, router 5-15
reducing interference 5-16
reference documents B-1
region of operation 2-7
registering product ii
releasing connection status 6-5
remote devices, testing path 7-10
remote management 6-13
renewing connection status 6-5
repeater units 4-15, 4-19
requirements, speed 5-25
reserved IP adresses 4-5
Resource CD 1-1
restarting network 7-1
restoring
configuration 6-8
default factory settings 7-12
restoring firmware 7-3
restricting access by MAC address 2-19
revision history xii
RIP (Router Information Protocol) direction 4-3
route name 4-11, 4-12
router PIN 2-15, 2-17
router status, viewing 6-2
S
scheduling blocking 3-5
screen display language 1-5
selecting 1-5
secondary DNS server 1-8, 1-11
security
options, compared 2-2
setting up 2-1
security PIN 2-15, 2-17
service name 1-10
service numbers 3-4
services, blocking 3-3
setting time 3-9
settings, default. See default factory settings
setup information, gathering 2-5