NETGEAR WNR2000v2

NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
Safeguarding Your Network 2-24
v1.0, January 2010
1. Select Guest Network from the Setup menu. The Guest Network Settings screen appears
2. Select any of the following Wireless settings:
– Enable Guest Network – When this check box is selected, the guest network is enabled,
and guests can connect to your network using the SSID of this profile.
– Enable SSID Broadcast – If selected, the Wireless Access Point broadcasts its name
(SSID) to all Wireless Stations. Stations with no SSID can adopt the correct SSID for
connections to this Access Point.
– Allow Guest to access MY Local Network – If selected any user who connects to this
SSID can access local networks associated with the router like users in the primary SSID.
3. Select a Security option from the list. For a description of each Security option, see Table 2-1
on page 2-3.
4. Click Apply to save your selections.
Figure 2-14