3 PACKAGING, TRANSPORTATION,
STORAGE
PAGE
3.1
Store room:
- The environment in which rubber products are being kept must be cool, dry, free of
dust and naturally ventilated.
- Rubber products must not be stored in the open, not even in an area sheltered
from the weather.
- Rubber products should be stored at temperatures above minus 10 °C and not
more than plus 15 °C. Store rooms should not be damp and there should be no
condensation.
- Rubber products should be stored in an environment offering a relative humidity
under 65 %.
- Rubber products must be protected against light, particularly direct sunlight or high
UV artificial.
- Rubber products should be kept away from forced ventilation and draughts; under
these conditions they should be wrapped.
- As ozone is very aggressive and harmful to rubber products they should not be
stored in the same room with equipment likely to produce ozone, e.g. electric
motors or other equipment which could electrically discharge or cause sparks.
- Rubber products should not be stored together with solvents, oil, grease, lubricants
or any chemicals.
L Rotor:
Please support with wooden blocks and cover up against harm from mechanical
impact.
For rotors of RCC (material number 1.2436):
coat the surfaces with protective grease to avoid rusting.
L Shaft Sealing by packing gland:
Remove the gland and coat the exposed shaft surface with grease.
L Pump parts in stainless steel:
No grease coating necessary.
L Other, non-coated pump parts:
Protect with grease.
L Drives:
Please observe the drive supplier's instructions.
issued: 27.07.2013 Revision: 7
text no.
03000-2/2
copy to:
IPP - EN - EN_03000_20150727/3 - D8411276 - 4300003998 - 000100 - NPS - 00229929 N 2018-02-21 19:03:25
To Next Page
Loading...
