7 MAINTENANCE
PAGE
7.0
7 Maintenance
7.1 Pumps in General
I The pumps should be regularly rinsed or cleaned if deposits of medium are likely to
build up (sedimentation).
If the pump needs to be opened to do this, ensure that the pump and motor are
switched off and cannot be turned on accidently (eg. by removing the fuse).
Periodical standstill to allow for cleaning during operation depends on the medium
and type of operation.
L The pump can be cleaned:
- through the cleaning ports provided in the pump housing
- manually by dismantling the pump
- automatically (CIP cleaning) for special housings with a flushing section (important
instructions for CIP procedures are given in Section 5 (START UP).
issued: 09.01.2013 Revision: 4
text no.
07100-1/1
copy to:
IPP - EN - EN_07100_20130109/1 - D8411276 - 4300003998 - 000100 - NPS - 00229929 N 2018-02-21 19:03:25
To Next Page
Loading...
