1 SAFETY PRECAUTIONS
PAGE
1.0R
Warning plates located directly on the pump/equipment showing for example
- the correct direction of rotation
- the fluid connections
must always be observed and kept completely legible.
1.2 Qualified personnel
For safety reasons, all work on this machine may only be performed by qualified
personnel. Qualified personnel are persons who have sufficient knowledge in the
following areas as a result of their specialist training, experience and the instruction
they have received:
- Safety regulations
- Accident prevention regulations
- Technical guidelines and recognised technical rules
Qualified personnel must:
- be able to assess assigned work and to recognise and avoid potential dangers.
- be authorised by the manager responsible for system safety to perform the
required work and operations.
1.3 Dangers arising from non-observance of the safety instructions
Non-observance of the safety instructions may endanger persons and the environment
and may damage the machine.
Non-observance of the safety instructions may lead to loss of any claims for damages.
Specifically, non-observance may, for example, have the following consequences:
- Hazard to persons from electrical, mechanical and chemical influences.
- Hazard to the environment from leakages of hazardous materials.
- Loss of important functions of the machine.
- Failure of prescribed maintenance and repair methods.
1.4 Safety instructions for the user / operator
L If there is a risk of danger from any hot or cold machine component, the user must
fit protective guards to prevent such components from being touched (according to
Standard EN 563).
L Protective guards fitted to prevent contact with moving parts (eg. couplings) must
be in position when the machine is in use.
L Leakages (eg. from a shaft seals) of hazardous materials (eg. explosive, toxic, hot
material, etc.) must be discharged and disposed of in such a way that neither
personnel nor the environment are placed at risk. Legal directives must be
observed.
L All possible danger from electricity must be eliminated (eg. refer to the regulations
in force of your local power supply company).
text no.
R 01004-1/3
issued: 03.05.2016 Revision: 3
copy to:
IPP - EN - EN_01004_20160503/2 - D8411276 - 4300003998 - 000100 - NPS - 00229929 N 2018-02-21 19:03:25
To Next Page
Loading...