NEURON THC User Manual

USER MANUAL
Note: Positions on this tab are stored in the UCCNC profile file and can be changed in the THC
configuration (plugin configuration) window.
On the “Stored Position” tab operator can store current position on the cutting patch and then
restore this position. Plugin store all data for this point, include g-code file name and path to this
file.
Click on the “Add New Position” button to store current position data.
Click on the “Load Selected Position” button to move torch to the stored position.
Note: all positions are stored in machine coordinates. If machine was not homed then this
future will not available.

NEURON THC Specifications

General

Brand	NEURON
Model	THC
Category	Controller
Language	English