Chapter 3 – Setting Up Your MindWave
Wireless Adapter Setup
Wireless Adapter Installation
Important: Please install the MindWave software before inserting the MindWave wireless adapter.
Important: You must properly install the supplied wireless adapter and its drivers in order to use the
MindWave.
Windows
1. Insert the supplied MindWave Disc into your disc drive.
2. Run the MindWave-Setup.exe installer if prompted or double-click on MindWave-Setup.exe
3. Follow the instructions on the installer.
4. Once the installer nishes, you may need to reboot.
5. Insert the MindWave wireless adapter.
6. Run the MindWave Manager program.
7. Click Pair your MindWave…
8. Select Automatically scan for MindWaves in range (recommended) and click Continue
9. e MindWave Manager will scan for your MindWave. If found, the MindWave will display
your MindWave's ID.
10. If your MindWave's ID is correct, click Yes.
11. Your MindWave is now paired.
Note: e MindWave's ID may be found under the battery door.
Wireless Adapter Setup
September 10, 2010 | © 2009 NeuroSky, Inc. All Rights Reserved.
10
To Next Page
Loading...
