Chapter 3 – Setting Up Your MindWave
Serial Port Name
Many applications will ask for you to enter the dongle's serial COM port name or number in order for
it to nd and connect to the RF dongle and get brainwave data. To nd out which Windows COM
port the RF dongle is assigned to, follow the instructions below:
Windows
In Windows, open the Control Panel ! System ! Hardware tab ! Device Manager ! Ports. e
port will appear as "MindWave USB Adapter (COM NN)" where NN is your COM port number.
Serial Port Name
September 10, 2010 | © 2009 NeuroSky, Inc. All Rights Reserved.
11
To Next Page
Loading...
