Chapter 6
Maintenance
• Clean the MindWave's sensor and ear contacts with alcohol-wipes (alcohol-based cleaner) peri-
odically to ensure the best signal quality. Use a soft cloth to clean the MindWave casing
• For travel and storage, gently push the sensor arm up until it is aligned with the top of the head-
set. Be careful not to overextend the maximum range of the boom by adjusting it beyond the
natural stopping point
• Do not expose the MindWave to temperatures above 140°F (60°C)
• Dropping or throwing the MindWave may damage the MindWave
September 10, 2010 | © 2009 NeuroSky, Inc. All Rights Reserved.
17
To Next Page
