5
There are 10 TIME OUT Timers available. Timer 0 is preset to 30 seconds with a warning horn at 10
seconds.
Press TIME OUT TIMER START.
The display will prompt.
[_TIMER_#__(0-9)?___]
When you enter the desired number, the preset Time Out Time is displayed on the control, and on
the scoreboard if set to do so, and begins counting down. When only the warning time remains, a
warning horn sounds briefly (if set up). When the timer reaches zero, the horn sounds briefly again
and the time begins counting up on the control. Any time the Main Time is turned on, the Main
Time is restored to the display(s) and the Time Out Timer is canceled.
Press SET, then TIME OUT TIMER START
to set up a TIME OUT TIMER.
The display will prompt
[__TIMER_#__(0-9)?___]
Enter the number of the timer to
set up or overwrite. The control will prompt.
[__SET____MM:SS____]
Enter the total
length for the time out. The control will ask “
DO YOU WANT TO USE TIME
OUT WARNING HORN?
” If you answer YES the control will prompt
[__SET____MM:SS____]
Enter the warning time.
The control will ask “
DO YOU WANT TO DISPLAY TIME OUT ON
SCOREBOARD?
”
Press TIME OUT TIMER CLEAR
to cancel the currently active portion of the Time Out Time.
(If the warning horn has not yet sounded, it will sound and the timer will continue from the
warning time).
Time Out Timer
Start
Time Out Timer
Clear
To Next Page
Loading...
Need help?
General
