New Biometric Solution Biolock 333 - Chapter3. Installation; Tools Required for Installation

User Manual
Chapter3. Installation
3.1 Tools required for installation
1.Pencil
2.Tape
3.Measure
4.Drill
5.Auger for basket hole
Diameter: 2-1/8”(54mm)
6. Auger for latch hole
Diameter: 1” (25.4mm)
7.Auger for fixing screw
Diameter: 3/8” (10mm)
8. Screw driver
9.Knife
10. File 11.Hammer 12.Chisel
-14-