Newco FKP-3 - Machine Operation; Brew Operation Guide

7
DRAWER OPEN
BUTTON
MACHINE OPERATION
BREWER MESSAGE DISPLAY
PUSH & HOLD FOR HOT
WATER DISPENSE WHEN
DRAWER IS CLOSED
PROGRAMMABLE
BREW BUTTONS
(CUP STRENGTH
OR CUP SIZE, TEA,
ETC
• TEMPERATURE RANGE IS 170-203 DEGREES
• POWER SAVE OR POWER DOWN FEATURE AVAILABLE
PUSH TO
RETURN BREW
MECHANISM TO
HOME POSITION
WHEN DRAWER
IS OPEN
• BEEPER VOLUME CAN BE ADJUSTED OR BEEPER CAN BE SHUT OFF
• AIR PUMP POD DRYING TIME & PUMP STRENGTH CAN BE ADJUSTED
• POD COUNT TO EMPTY POD WASTE BIN AJDUSTABLE OR CAN BE
TURNED OFF IF USING THROUGH THE COUNTER WASTE BIN
• COFFEE OR TEA PRE-INFUSTION, BREW TIME & BREW VOLUME
ADJUSTABLE FOR EACH OF 5 CUSTOMIZABLE DISPENSE BUTTONS
BREW OPERATION
1. PLACE CUP UNDER BREW NOZZLE ON DRIP TRAY
2. PRESS THE DRAWER OPEN BUTTON
3. UNWRAP THE POD & PLACE IN CENTER OF BREW CHAMBER
4. PRESS THE DESIRED BREW BUTTON-DRAWER WILL CLOSE &
BREW CYCLE WILL START
5. ONCE THE POD DRYING CYCLE IS COMPLETE, THE POD WILL
EJECT & THE CUP CAN BE REMOVED