11
BREW MECHANISM
ACCESS SCREWS
(VIEW FROM BOTTOM FRONT OF MACHINE)
REMOVE
BRASS
KNURLED
NUTS
(2)
LOOSEN
ACORN
NUTS
(4)
DRAINING THE HOT WATER TANK
THE DRAIN TUBE IS CLIPPED TO THE TANK PLATE IN FRONT OF THE TANK.
THE HOT WATER TANK CAN BE DRAINED FROM THE FRONT OF THE MACHINE –
UNPLUG MACHINE FROM POWER SOURCE. REMOVE POD WASTE TRAY.
CAUTION-UNLESS THE TANK IS LEFT TO COOL THE WATER IS EXTREMELY HOT
AND CAN CUASE HARMFUL BURNS. REPLACE DRAIN PLUG, ENSURE HOSE
CLAMP IS TIGHT AND REPOSITION DRAIN HOSE BEFORE RE-FILLING THE HOT
WATER TANK.
SERVICING THE MACHINE
The Fresh Kup machine has a modular Water Tank Assembly and Brew Mechanism.
These assemblies can be easily removed from the machine by removing or loosening
Machine nuts as noted in drawings below:
Front Of Brewer
NOTE: TO REMOVE BREW
MECHANISM, UNSNAP WATER
& HARNESS FITTINGS
To Next Page
