NewLine FLEX - Controls and Modules; Control Buttons Overview; SDM Module Installation; Stylus Attachment

FLEX Quick Guide
・
Control Buttons
・
SDM (Smart Display Module) (Sold separately)
・
Attaching the stylus to the Flex
Power Button
1.
2.
3.
Magnetically attach the stylus to the right/left side of the Flex.
Volume Up
Menu
Volume Down
Microphone Mute/Unmute
Camera Toggle On/Off
SDM Security Screws
SDM Face Plate
SDM Installation Procedure:
Unscrew the two security screws using a Phillips head
screwdriver to remove the blank SDM faceplate.
Align the SDM grooves and rmly push the module into
place to ensure it is seated correctly.
Use the screws from step one to secure the SDM Module.