Newport 1936-R series Startup Guide

Start Up Guide 7
 BNC Analog Output, Channel B (2936-R)
 BNC Trigger Output, Channel B (2936-R)
 BNC Trigger Input
 USB (Universal Serial Bus) Device
 9-Pin D-Sub RS-232
Figure 3 2936-R Rear Panel Layout
The rear panel also has an AC input power connector (IPC) with a standard
three-prong socket and voltage setting switch.
The unit can also be grounded with a circular metal shell connector.
Markings on the rear panel identify electrical requirements for the Optical
Power Meter and potential hazards associated with using it.
NOTE
For the listed optional connectors some units may have a cover in place of the
non-functional connector.
CAUTION
Change the voltage settings switch to the proper AC voltage
supply. Do not operate with a line voltage that is not within 
10% of the line setting. Too low of an input voltage may cause
excessive ripple on the DC supplies. Too high of an input
voltage will cause excessive heating.

Newport 1936-R series Specifications

General

Brand	Newport
Model	1936-R series
Category	Measuring Instruments
Language	English