Newport 1936-R series Startup Guide

5
2 System Start Up
2.1 Startup Procedure
Provided that the power meter has been installed in an appropriate
environment and its power cord is connected to a working electrical outlet,
power-up the power meter by pressing the power button on the lower left
corner of the front panel.
For precise accuracy, 1936-R/2936-R Series power meters should be allowed
to warm up for one hour before being used for measurements.
2.2 Front Panel Keys
The front panel keys are organized in three groups (see Figure 2).
 Navigation Keys
 Reconfigurable (also called Soft) Keys
 Escape (ESC) Key
Besides these keys, the front panel has a Power switch and a USB connector
on the left side of the instrument.
Figure 2 Front Panel keys
WARNING
To avoid electrical shock hazard, connect the instrument to
properly earth-grounded, 3-prong receptacles only. Failure to
observe this precaution can result in severe injury.
Navigation Keys
Dedicated Keys
Reconfigurable (Soft) Keys
USB Connector
Power Switch
Escape Key

Newport 1936-R series Specifications

General

Brand	Newport
Model	1936-R series
Category	Measuring Instruments
Language	English