Need help?Do you have a question about the Newport 1815-C and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Interface | RS-232 |
| Power Resolution | 1 pW |
| Accuracy | ±3% |
| Output | Analog |
| Detector Type | Silicon photodiode |
Details warnings and cautions applicable to the instrument for safe operation.
Description of controls and settings on the front and rear panels of the meter.
Details the function of the Range knob for adjusting signal gain.
Steps for connecting and configuring the detector with the meter.
Explains how to input the calibration factor for accurate measurements.
Procedure to adjust the mantissa part of the calibration factor.
Procedure to set the exponent part of the calibration factor.
Discusses detector calibration, accuracy ranges, and traceability.
Procedure for making a basic optical power measurement.
Step-by-step guide for taking an optical power measurement.
Procedures to verify the electrical performance and accuracy of the meter.
Step-by-step guide to verify current and voltage measurement performance.
Provides solutions for common symptoms and faults.
To Next Page
