Need help?Do you have a question about the Newport 1917-R and is the answer not in the manual?
General| Brand | Newport |
|---|---|
| Model | 1917-R |
| Category | Measuring Instruments |
| Language | English |
Details limitations of the warranty, excluding damage from misuse, accidents, or unauthorized modifications.
Describes the standards the equipment complies with.
Explains how to contact support and what information to provide.
Information on FCC compliance for Class B digital devices and steps to mitigate radio frequency interference.
Recommends reading the manual for full performance and describes the 1917-R's features.
Instructions for unpacking, inspecting for damage, and reporting claims to the shipping company.
Lists the components included with the 1917-R Hand-held Power Meter.
Details operating temperature, humidity, and calibration cycle for specifications.
Explains how to turn the device on/off and control the backlight.
Toggles between fast and slow response modes, shortens response time in fast mode.
Enables min/max readings and activates/deactivates the attenuator setting.
Toggles display modes and needle styles (single, tail, bar graph).
Allows manual selection of wavelength or range, storing it in memory.
Displays maximum recorded values and returns to measurement mode.
Displays minimum recorded values and converts to dBm or Watts.
Refers to section 2.2 for a detailed description of the LCD screen.
Details the DB-15 female connector for mating with detectors.
Explains the analog output signal for external monitoring equipment.
Specifies input voltage and current for the external power supply.
Step-by-step guide for connecting the detector and making a power measurement.
Instructions for zeroing the detector for accurate measurements.
Lists the detector heads compatible with the 1917-R.
Describes the main LCD display, including digital and analog needle indicators.
Lists and explains various error messages displayed by the 1917-R.
Recommends using good quality new alkaline or rechargeable batteries.
Step-by-step instructions for installing batteries correctly.
Instructions on how to safely remove batteries using the provided strap.
Explains how to obtain an RMA number for returning the instrument for service.
Outlines the process for obtaining warranty service and conditions for repair costs.
Procedure for recycling and separating components of the power meter at its end of life.
Categorizes materials of the power meter for separation and recycling.
Provides step-by-step instructions for dismantling the power meter for recycling.
To Next Page
