20
Error
Code
Description Solution
E-03
Motor is overvoltage
The voltage of the battery is too high
to power the motor, if the battery is
normal, make sure to setup correct
battery type on the motor. Please
follow 5.2.2 Switching Between
Battery Types to operate correctly.
Press the Power button for 2 seconds
to reset the system and if the voltage
is within operational range again the
error code will disappear.
E-04
Motor is stalled.
The motor is stalled and stopped.
Please lift the motor and check if
there’s anything blocked the propeller.
Press the Power button for 2 seconds
to reset the system. If the propeller
is clear and the error still remains,
contact customer support about
repairs.
To Next Page
Loading...