24
6.4 Emergency Stop
To stop immediately you can:
Pull off the magnetic emergency stop switch from the tiller to stop the
motor.
Move the handle of the tiller to the neutral position to stop the motor.
If you want to restart the motor after the emergency kill switch is
pulled off, move the handle of tiller to the neutral position, return the
kill switch, and power on.
Stopping the Motor
To stop the motor, follow the steps below:
1. Move the handle of tiller to the neutral position.
2. Press the On/Off button on the speed controller.
3. Remove the emergency kill switch.
To Next Page
Loading...