25
6.5 Finishing the Trip
When the trip is nished, please disconnect the motor from the battery
and take the motor out of water. If the motor was used in the saltwater,
thoroughly rinse the motor with fresh water. This will help prevent
corrosion and salt buildup. Only wash the motor; do not get the speed
controller wet.
6.6 Stow the Motor
When needed, the motor can be tilted up to stow away or to avoid
underwater obstacles. Before lifting the motor up make sure the
reverse lock is lifted up.
It’s recommended to keep the reverse lock
unlocked (lifted) when the motor drives forward since motor will be
kicked up automatically with this setup.
To Next Page
Loading...
Need help?
General
