EasyManua.ls Logo

Newport NT300 - Installation; Install the Motor in the Boat

Newport NT300
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
3.4 After Use
Disconnect the motor from the battery after use.
Flush the motor carefully with freshwater after each usage,
especially after use in saltwater.
Do not carry the kayak/boat by lifting with the bracket. This can
cause damage to the boat and potentially to the bracket.
4 Installation
4.1 Install the Motor in the Boat
1. Place the motor on the transom of the boat.
It’s suggested to mount the motor at the centerline
of the boat for better steering experience.

Related product manuals