ASSEMBLY INSTRUCTIONS
6J19Y06P-1
STEP 4: Attach propane gas tank to regulator inlet fitting by turning the
regulator clockwise as shown in figure below. LP gas cylinder must be
fitted with a listed overfill prevention device (OPD). Open the door and
pull out the tray, place the gas tank cylinder in the tank tray , then use
retention kit that showed as below diagram to secure the tank cylinder .
Make sure tank is leveled with bottom panel for proper vapor withdrawal.
g
O
P
E
N
C
L
O
S
E
CYLINDER TANK FIXED
800
700
600
500
400
300
200
100
To Next Page
Loading...
