GAS CONVERSION
Main Tube Burner Conversion
Steps
1. Remove the rotisserie kit, warming rack, cooking grids, flame tamers and tube burners
from the firebox.
2. Locate orifice on end of valve and remove by turning counterclockwise with a 8mm Nut Driver.
CAUTION!
When converting the grill, screw the orifice in and out of the stem gently due to the breakable thread.
3. Insert NG orifice and screw in tightly.
4.Replace tube burners back.
J19Y06P-1
38
To Next Page
Loading...
