Nexo GEO S Series

GEO S12 HARDWARE SETUP PROCEDURE
System Manual GEOS12 LS18 Page 25 / 95
6.2.3 LS18
LS18 incorporate two connecting plates (one per side) on which a comprehensive range of accessories can be mounted.
LS18 connecting plates
Angle splay setting sequences are as follow:
- LS18 to LS18: 0.2°
- LS18 to GEO S1210: -5° / -2.5° / -1.25° / 0.2° / 0.31° / 0.5° / 0.8° / 1.25° / 2° / 3.15° / 5°
- LS18 à GEO S1230: -5° / -2.5° / -1.25° / 0.2° / 0.31° / 0.5° / 0.8° / 1.25° / 2° / 3.15° / 5° / 6.3° / 8° / 10°