DESCRIPTION
Page 6 / 18 P12
DESCRIPTION
The P12 is a compact full-range coaxial speaker
P12 HF Dispersion:
• 60° - 60° with standard horn
• 90° – 40° with PNT-P12FLG9040
• PS with PNT-P12FLGPS (Asymmetrical Dispersion)
P12 can be used alone or with L15 subwoofer
The speaker is equipped with four Speakon NL4 connectors with parallel-wired pins, one on each side and two on the back.
On the back a switch allows to choose between ACTIVE MODE/PASSIVE MODE.
• PASSIVE MODE: 2+/2-. The 1+/1- pins are used by the sub.
• ACTIVE MODE: LF (1+/1-) – HF (2+/2-)
Amplification
• The P12 speakers must be used with a NEXO processor to handle EQ, phase alignment, crossover and
excursion/thermal protection for the system loudspeaker. There are two NEXO processor series supporting the P12
speakers: NXAMP (4 channels) amplified processors and DTD processors (stereo + sub). DTD processors ensure
optimal performances when used with DTDAMP power amplifiers.
• The following table shows the number of P12 speakers and L15 subwoofers usable with each solution.
To Next Page
Loading...
Need help?
General
